Lot details Registration No: XKR782A Chassis No: 30837S107895 Mot Expiry: T.B.A.
ENTERED FROM THE LITCHFIELD COLLECTION
"One glance at the new Corvette tells you that it is faster and sportier than its predecessors. And when you drive a Corvette Sting Ray, either the Convertible or the fastback Sport Coupe, you find that excitement is far more than skin deep" (Car & Driver, October 1962).
Arguably the most iconic Corvette, the `Sting Ray' (or C2) variant was introduced for the 1963 model year. Heavily influenced by GM Design Chief Bill Mitchell's XP-87 `Sting Ray' racer not to mention Chevrolet's striking XP-720 fastback prototype, the newcomer's styling was primarily credited to Larry Shinoda. A clean sheet design, the C2's ladder-frame chassis sat on an 8ft 2in wheelbase and featured five cross members, all-round independent suspension (a Corvette first) and large-diameter drum brakes. Differing states of tune and a choice between carburetion and fuel injection meant that the small block 327 cu in V8 engine fitted to all debut season `Sting Ray' cars was quoted as developing anywhere from 250hp - 360hp. Although the two-seater could be specified with automatic transmission, some eighty percent of customers chose the more responsive four-speed manual gearbox. Fielding a fixed-head coupe derivative (another Corvette novelty) allowed the C2 to compete head-on with European rivals such as the Jaguar E-type. Attributed to Bill Mitchell but famously disliked by the `Father of the Corvette' Zora Arkus-Duntov, the `dorsal spine' which initially bisected the Sport Coupe's fibreglass bodywork and travelled through its rear window was discontinued after just a year (as were the dummy bonnet vents). Thanks to the efforts of Zora Arkus-Duntov, Kai H. Hansen, Carl C. Jakust, H.F. Barr and E.J. Premo, the `Sting Ray' was not only lower, narrower and shorter than its forebear but also faster, better balanced and more aerodynamic. Priced at $4,037 and $4,252 respectively, the `63 Convertible and Sport Coupe accounted for some 21,513 sales (10,919 open vs. 10,594 closed). An almost instant classic due to its truncated production run, the `Split Rear Window' Coupe has long been prized by enthusiasts.
Manufactured in St Louis, Missouri, this particular left-hand drive example - chassis number 30837S107895 - was imported to the UK during 1991. Upgraded at some stage with a later Chevrolet 350 cu in (5.7 litre) V8 engine, invoices on file from Claremont Corvette and Classic Automotive show that the `Split Rear Window' Sport Coupe has also benefited from attention to its Holley carburettor (1994), Muncie four-speed manual gearbox (overhauled circa 10,000 miles ago, 1995), clutch / flywheel (1995), rear suspension / brakes (1996), shock absorbers (1996), rev counter / speedometer (1997), paintwork (renewed from bare gelcoat to top coat, 1998) and ignition system (1999). Sparingly used since entering the Litchfield Collection in September 2003, accompanying MOT certificates indicate that `XKR 782A' has covered circa 200 miles over the past eight years. While more recent work has apparently included a partial brake system refurbishment and the fettling of its pivoting headlamp mechanism. Finished in Daytona Blue with Black upholstery and riding on turbine alloy wheels, this highly sought after `Split Rear Window' Sport Coupe is offered for sale with a letter from the Classic Corvette Club UK, assorted literature, various Claremont Corvette / Classic Automotive / Rodley Motor & Eng invoices, paintwork restoration photos and the aforementioned MOT certificates.
All successful bids must be paid in full by midday the day after the auction at the latest.
You can collect your new pride and joy from our venue until 1pm the day following the sale or our partners are on hand to help arrange safe transportation:
If so, contact one of our friendly specialists for your free valuation by completing the form below and someone will get back to you as quickly as possible.
If you prefer to speak to humans, don't hesitate to call our office on +44 (0)1925 210035